2X2 LED Flat Panel 3500K

Typically used to replace 2'x2' fluorescent lay-in troffers, the MaxLite MLFP2X2835 is a high performance ETL, cETL and RoHS compliant Light Emitting Diode (LED) recessed flat panel that is designed for installation in grid style drop ceilings.  The profile is slim, only 1.68" inches deep, including the junction box, so the fixture is ideal for low depth ceiling cavities - whether in an office, school or medical facility (a remote driver is available for MRI Imaging models).  Rated for Indoor Use, the Maxlite LED recessed light panels are fully dimmable and are compatible with building controls, motion sensors, timers and daylight harvesting systems.  All Maxlite LED Flat Panel fixtures carry a 5 Year Warranty.  (Click here to see the complete Maxlite MLFP2X2 LED Flat Panel Specification Sheet and Photometric Data)

Accurate quality control of the LEDs being installed in each light panel, through the use of Proprietary Binning, produces uniform color consistancy. The housing and the back panel are aluminum to provide maximum heat sink and thermo control capabilities and each panel weighs in at just 7.3 pounds each.  These LED ceiling panels consume just 60 watts of 120-277 volt energy and the driver has a power factor over 98%.  They generate 3,150 lumens, have a rated lumen maintenance of 50,000 hours based on L70 lumen depreciation, a color temperature of 3500K and a CRI of 85.  The trim is electro plated white for a high end finish.  In keeping with the quality of the rest of the materials, the lens is a translucent white polycarbonate that produces an even, consistent shadowless light.     

These LED drop-in panels are fully dimmable from 4 types of input signal (0-10V, IR Dimming, Simple Dimming or DMX512).  Each panel has a Master/Slave switch on the back.  During installation, one fixture in the room should be switched to Master and the others in the room should be switched to Slave.  With a specialized 10 foot RJ25 communications cable (supplied free of charge) each fixture is joined to the next (for information and specifications on either linking more than 10 panels, or on Green Building DMX controls, please contact Maxlite Technical Support).  When all of the units are joined, one remote control aimed at the Master unit will control all of the other units in the room, up to a maximum of 10 units.  With one click, all the other units can be turned on, dimmed and turned off.  The Master unit controls the whole room.