LED Lightbar Connection Box

 

UL Listed, Maxlite MLSDLBCONN (70588) LED Lightbar Connection Box - For use with Maxlite Self-Driven LED Lightbars when splicing romex cable to the LED Joiner Cables.

 

Utilize the Maxlite MLSDLBCONN LED Lightbar Connection Box when splicing a connection between romex cable and a Maxlite LED Lightbar Joiner Cable.  This LED connection box is easy to use.  Remove the screw on the top of the connection box to access (2) mechanical lugs.  These lugs are the termination point for your romex.  Once the romex has been secured in the mechanical lugs, put the cover and screw back to their original location.  The other end of the connection box is the female socket that accepts a dual ended joiner (shown in picture above).  The joiner that you choose for your specific application can range from the short joiner which comes with each LED lightbar or the longer dual ended joiner seen below in the related products portion of this page.  Simply plug one end of the joiner into the connection box and the other end into the first lightbar in your sequence.

 

NOTE:  Local and National Electrical Codes require that this connector is NEVER to be installed outside of a junction box - e.g. loose hanging within the confines of any wall, between drywall, or any other structure.  Please consult your local NEC Code regulations and/or contact a licensed electrician for further local installation requirements.