56 Watt LED Lighting Retrofit

We have heard a slogan that “An educated consumer is our best customer” and you have probably heard the saying “you get what you pay for” (and sometimes this is correct). When you buy an LED product you should be expecting that product to last 50,000 hours or longer. Your return on investment (ROI) is calculated to save you money by giving you less maintenance and low wattage consumption resulting in saving you money through the electricity costs. Being able to identify quality, that will perform, is key. Let’s break down an LED product:  You have an Enclosure, then the LEDs themselves, the Heat Sink being used, the design of the Lens and the power supply.  The Power Supply, also known as the Driver, is the most important part to having a successful LED design - the heart of every LED lamp.  An LED light source will only produce light as long as its power supply is operational.  S3J Electronics has 20 years of power supply designing experience. Knowing how to design power supplies to last 80,000 hours or longer is one of the things they do best. If the 30% depreciation of the LED is rated for 50,000 hours then you are going to want a power supply to last at least as long. So having the power supply designed correctly is very important – and you have finally found the source for just that!

This S3J designed, Made in the USA, LED retrofit bulb, part number WRBE40-0564277 (Click here to see the complete WRBE40 Specification Sheet With Illumination Charts) easily retrofits into most existing fixtures.  A great replacement for your 400 watt High Pressure Sodium (HPS) lamp. This HID retrofit bulb is classified as having a Type III short light distribution. Note: replacing an existing cobra head dome lens with a flat safety glass lens will yield a Type 3 pattern. With a color temperature of 4500-5000 degrees Kelvin (K), a working voltage of 100 to 277 volt, environmentally friendly design (emits no UV, IR and contains no Lead or Mercury) and, of course, the power supply to keep your retrofit working for years to come, the S3J WRBE40-0564277 is your retrofit choice.  This LED retrofit consumes just 56 watts of energy - providing an awesome 114 lumens per watt!  The lamp is also designed with the standard E40 mogul base for simple installation.

The S3J retrofit bulb is built using Cree 1.1 watt LEDs and a working temperature of –30C to 45C.  Designed per the D.O.E. recommendation for Outdoor Street Lighting, this LED retrofit bulb can reduce energy consumption by 70%.  It also meets Me4 Roadway requirements.   This HID retrofit lamp has been submitted, and is currently pending, UL and CUL listing.  The 3 year labor and part warranty against manufacturer defect is provided to use under normal operating conditions.  Proof of purchase date must be provided when warranty service is requested.  Notice: improper use or unauthorized repair will void the warranty.