Light Efficient Design is dedicated to providing the type of products that you demand and the metal halide ballast compatible LED retrofit is no exception! The LED configuration is optimized for shoebox or wallpack HID fixtures making this LED for HID retrofit your new go to option. This retrofit bulb works directly off of your 320 watt pulse start metal halide ballast (ANSI M132) or your 400 watt metal halide ballast (ANSI M59). This unique LED retrofit requires an HID ballast to remain a part of the fixture - DO NOT by-pass the ballast. Simply remove your current 320w pulse start (M132) or 400w (M59) metal halide lamp and replace it with the Light Efficient Design LED-8090M50-MHBC for a quick and easy plug-and-play retrofit option.
Light Efficient Design's Metal Halide Ballast Compatible retrofit LED bulbs are suitable for totally enclosed shoe box, wall pack and other typical HID fixtures, UL Classified for damp locations, Type V optics (note: Type III and Type IV optics are available and are special order). Part number LED-8090M50-MHBC consumes just 120 watts of 120 to 277 volt 60 Hz energy and generates a comparable light output to your 320 watt pulse start or 400 watt metal halide bulbs. This non-dimmable LED light bulb, an LED Site, Roadway or Wallpack lighting retrofit option, will produce 10,810 Lumens of light output. Utilizing advanced active cooling, via a Sunon Mag-lev >70,000 hour fan with temperature control, ensures a long LED life of up to 50,000 hours. Give them a try - You will be very pleasantly surprised.
These LED bulbs have a screw-in EX39 mogul base that easily integrates energy saving LED technology into your standard pole top shoebox, roadway or wall pack lighting format. The rotatable base enables you to accurately direct the LED output to your specified target. The physical dimensions of the Light Efficient Design metal halide ballast compatible 5000K Daylight LED retrofit are 11.4 inches long by 4.3 inches wide. These NON-dimmable LED retrofit bulbs carry a 5 Year Limited Warranty.