MaxLite's LED Linear T8 with internal driver replacement Lamps are the ideal energy saving choices when upgrading traditional linear T8 or T12 fluorescent lamps in fixtures containing standard non-shunted G13 (medium bi-pin) sockets. These DesignLights Consortium (DLC) qualified LED T8 lamps are designed to provide appropriate light levels while utilizing a dedicated internal driver. With a simple ballast bypass, MaxLite LED T8 lamps can provide up to 44 percent in energy savings when compared to 32 watt fluorescent lamps.
MaxLite tube lights has a power factor over 90 and consumes just 16.5 watts of 120 to 277 volt 50/60 Hz energy. The DesignLights Consortium Listed, UL Listed, LM79 and LM80 verified LED T8 tube retrofits are designed to provide appropriate light levels while utilizing a dedicated internal driver and non-shunted G13 medium bi-pin lamp holders.
The MaxLite L16.5T8SE4(XX)-CG is a non-dimmable LED light bulb and it will produce 2,300 lumens of light output (that's an awesome 139 lumens per watt). They have an opal (frosted) lens, a CRI of 80, a 330 degree beam angle and a rated life of up to 50,000 hours based on L70. They are a perfect choice for use with MaxLite's LED Lamp Ready Fixtures.
These LED fluorescent retrofits have a G13 medium bi-pin base which easily integrates energy saving LED technology into your standard recessed fluorescent troffers or industrial fluorescent lighting format. (SPECIAL NOTE: These Fluorescent to LED Retrofit tubes require NON-SHUNTED medium bi-pin G13 sockets. These are the same sockets found in Rapid Start fluorescent fixtures. It is always prudent to replace the 'tombstone' sockets any time you retrofit a light fixture. For the MaxLite LED T8/T12 tubes be sure to replace your tombstone sockets with NON-SHUNTED sockets). The physical dimensions of the MaxLite LED retrofit are 47.75 long by 1.00 wide. Each L16.5T8SE4(XX)-CG LED fluorescent retrofit bulb has an internal driver and is wired live on one end only. These LED retrofit bulbs carry a 5 Year Limited Warranty.
The L16.5T8SE4(XX)-CG, 16.5 watt LED lamp has been designed to retrofit existing linear fluorescent T8/T12 installations, thereby reducing maintenance and energy expenditures in residential, commercial, retail displays, hotel, motel and resort applications and as an energy saving light source for new fixtures and installations. These T8 LED bulbs are rated for use in either dry or damp locations, has an operating temperature range of -4 degrees Fahrenheit to 113 degrees Fahrenheit and are DLC and RoHS compliant. Please NOTE: When retrofitting these LED tube lights to a fluorescent fixture, the ballast must be by-passed or removed from the fixture. Additionally, by-passing the ballast will insure no RFI interference.
