Satco's Hi-Pro Series LED Retrofit Lamps (also called out as an LED corn light or corn bulb) are a convenient and energy-efficient solution for replacing traditional compact fluorescent, high-pressure sodium and metal halide sources in enclosed lighting fixtures. The 54 and 100 watt models are designed with an EX39 Mogul Base that are ideal for acorn fixtures and outdoor security lighting where a higher lumen output is required. The Hi-Pro Lamp is available in 5000K Daylight.
Satco Hi-Pro, LED corn cob retrofit part number S13123. Suitable for totally enclosed post tops (Note: please allow a minimum of 1 inch of space between the lamp and any fixture surface) and other typical HID fixtures, these LED retrofit bulbs offer an omni-directional 360 degree beam angle. They consume just 54 watts of 277-480 volt energy and generate 8100 initial lumens of light output. An excellent energy saving bulb to replace your 250 watt Metal Halide (MH) or High Pressure Sodium (HPS) lamp applications. The S13123 is a non-dimmable LED corn cob light bulb. This LED Site, Roadway or Post Top lighting retrofit option carries a rated life of up to 50,000 hours and has an operating temperature range of -30 degree Celsius to +45 degrees Celsius.
They have an EX39 exclusionary mogul base that easily integrates energy saving LED technology into your site lighting, roadway or post top lighting format. Adding to their retrofit flexibility, they can be operated in either the base up, base down or horizontal position. The physical dimensions of the Satco LED 5000K daylight LED retrofit are just 9.50 MOL by 3.35 in diameter. These LED retrofit bulbs carry a 5 Year Limited Warranty.
The Satco S13123, 54 watt LED corn cob lamp, which is UL Listed for either Dry or Damp locations (IP65 rated), has been designed to retrofit existing HID installations, thereby reducing maintenance and energy expenditures in residential, commercial, retail displays, hotel, motel and resort applications and as an energy saving light source for new fixtures and installations. Please NOTE: When retrofitting LED to an HID fixture, the ballast must be by-passed or removed from the fixture. Additionally, by-passing the ballast will insure no RFI interference.