Satco's wattage and CCT selectable Hi-Pro LED lamp is an energy efficient lighting solution for large scale lighting applications. Designed to focus clean and efficient LED light at 180 degrees from higher fixtures, this lamp is perfect for parks, parking lots, or anywhere a cascade of light is needed for safety and impact. This versatile lamp is dimmable and delivers 50,000 hours of illumination.

Here are Satco's, LED retrofits that are suitable for totally enclosed wall pack, shoe box and other typical HID fixtures where a 180 degree beam angle retrofit LED bulb is preferred. Part number S28929 (40W/LED/WP/CCT/E26/100-277V) consumes 20/30/40 selectable watts of 120 to 277 volt 50/60 Hz energy and is designed to replace up to 175 watt Metal Halide (MH) or High Pressure Sodium (HPS) bulbs. This non-dimmable LED light bulb, an LED Site, Roadway or Wallpack lighting retrofit option, will produce between 3,200-6,000 Lumens of either 3000K warm white, 4000K cool white or 5000K daylight color, has a CRI of 80 and a rated life of up to 50,000 hours.

These LED bulbs have a 180 degree beam angle and the screw-in E26 Medium base mounting easily integrates energy saving LED technology into your standard site lighting, flood light or wall pack lighting format. Once the bulb is installed in your fixture, simply rotate the body of the lamp to direct the LED light output that best suits your specific application. This LED lighting retrofit is built with solid state technology which requires no fans or moving parts. The physical dimensions of the Satco LED retrofit are 7.80" MOL by 3.62" MOD. These NON-dimmable LED retrofit bulbs carry a 5 Year Warranty.

The S28929 20/30/40 watt LED retrofit lamp has been designed to retrofit up to 175 watt Metal Halide or HPS installations, thereby reducing maintenance and energy expenditures in residential, commercial, retail displays, hotel, motel and resort applications and as an energy saving light source for new fixtures and installations. Please NOTE: When retrofitting LED to an HID fixture, the ballast must be by-passed or removed from the fixture. Additionally, by-passing the ballast will insure no RFI interference.

Specification Sheet