Eiko's LiteSpanLED Series of LED HID Retrofit Lamps (also called out as an LED corn light or corn bulb) are a convenient and energy-efficient solution for replacing traditional compact fluorescent, high-pressure sodium and metal halide sources in enclosed lighting fixtures. The color temperatures for the complete series are either daylight 5000K or cool white 4000K.
This item is the Eiko LiteSpanLED LED15WPT40MED-G7. Suitable for totally enclosed post tops and other typical HID fixtures, these LED HID Replacement bulbs (also called out as an LED corn light or corn bulb) offer an omni-directional 360 degree beam angle. After you have the lamp installed in the fixture, the base will rotate to allow you to direct the LED light right where you would like. They consume up to 75% less energy than conventional HID systems at just 15 watts of 120 to 277 volt energy and generate 1,875 initial lumens of light output. An excellent energy saving bulb to replace your 50 watt Metal Halide (MH) or High Pressure Sodium (HPS) lamp. The LED15WPT40KMED-G7 is a non-dimmable LED light bulb. This LED bollard, post top or area/site lighting retrofit option carries a rated life of up to 50,000 hours and has an operating temperature range of -20 degree Celsius to 65 degrees Celsius.
These LED bulbs may be short in stature, but, they pack a powerful light output that provides instant full brightness. Designed with Solid State Technology which requires no fans or moving parts, these LED HID retrofit bulbs give outstanding reliability without any noise. They have an E26 medium base that easily integrates energy saving LED technology into even your tightest bollard, wall pack or post top lighting format. Adding to their flexibility, they are designed to be operated in either the base up, base down or horizontal position. The physical dimensions of the Eiko Gen 7 LED retrofit are just 5.75 MOL by 2.52 in diameter. These LED retrofit bulbs carry a 5 Year Warranty.
The Eiko 15 watt LED lamp, which is UL Listed for either Dry or Damp locations, has been designed to retrofit existing HID installations, thereby reducing maintenance and energy expenditures in residential, commercial, retail displays, hotel, motel and resort applications and as an energy saving light source for new fixtures and installations. Please NOTE: When retrofitting LED to an HID fixture, the ballast must be by-passed or removed from the fixture. Additionally, by-passing the ballast will insure no RFI interference.