Since its first super slim products launch in 2010, Lotus LED Lights have set the competitive bar extremely high and are the most preferred super slim recessed LED lights used by architects, interior decorators, designers, builders, electricians and homeowners in North America. Lotus LED Lights offers superior flexibility, unlimited layout options and can be installed anywhere in your home to create a gorgeous high-end living environment by delivering warm and inviting light. These ultra thin recessed LED down lights are absolutely perfect for tight spaces, soffits, sloped ceilings, insulated and dropped ceilings. The Lotus LED Lights super slim recessed LED fixtures are cULus Listed, cETLus Approved, Energy Star Certified, rated Type IC (Direct Contact with Insulation) and they are air-tight. A recessed downlight housing (also called out as a Pot Light Housing) is NOT Required - even for Insulated Ceilings. This 1 Thick, low profile LED fixture fits directly under joists giving you maximum lighting layout flexibility in even the tightest spaces.
Every Lotus LED fixture is constructed with integral Epistar LEDs and the 120 volt, 60Hz, isolated, external, magnetic, constant current driver is factory installed inside the junction box. Lotus engineered all of their fixtures with the constant current driver in order run their fixtures at 90% of their rated current. This provides additional reliability and longer life. You need one driver for every fixture. Lotus engineers believe that if you have one driver for multiple fixtures you need to have an additional current regulator on every fixture if you want all fixtures to have the same brightness and the ability to dim simultaneously. The Lotus LED system is more reliable. Should you need to disconnect one fixture you would not effect the operation of the others. (Note: All connections in any ceiling requires a junction box, which Lotus provides as the driver compartment). Fixture comes connected to the driver by 12 long low voltage cable with waterproof connector in the middle. Depending on where you want the driver to be you have 2 options: To locate the driver next to the fixture simply run your line voltage wiring to the first junction box in your circuit and daisy chain to the junction boxes of the other fixtures, or install all of your drivers at one location and use low voltage extension cables to the fixtures (Use only extensions provided by the manufacturer. Available jumper cables are 6 feet (1.8m) and 20 feet (6m). Cables are linkable). The maximum run should not exceed 40 feet (12m).
There are two 3" Gimbal models available to you from Lotus. The two primary differences are the brightness generated and the light color. As for brightness: model LL3G/30K generates 600 lumens and is a 50W halogen equivalent and model LL3G/41K generates 650 lumens and is also a 50W halogen equivalent. The trim diameter and width on the two models are the same: 3 1/4 inch diameter (Note: The hole has to be carefully cut since there is no room for mistakes). How much space do you need in the ceiling for the Gimbal? For these inch fixtures you need 2.5 inches of space above the drywall for Romex and 3.5 inches for MC or BX installations. The Lotus LED Light fixtures are really easy to install. Just check out the short video below.
This item is the Lotus LED Lights LL3G/41K/WH, replacement for the LY3G/41K/WH. It is the slim, low profile, 7.5 watt, 3" x 1" thin, round, Gimbal, LED recessed down light with a white trim (a black or brushed nickel trim option is also available). The LL3G/41K/WH is Air-Tight and is rated for Damp locations (Not suitable for steam showers, saunas and outdoor locations where directly exposed to rain). This 3 inch LED retrofit has a beam angle of 40 degrees, tilt angle of 30 degrees with a 360 degree rotation. The 4100K Gimbal generates 600 lumens and is designed to replace up to 50 watt halogen lights in recessed downlight applications. They operate on 120V, 60Hz input voltage (a 277v version is also available) and are dimmable down to about 20% when using approved dimmer switches.
Each Lotus LED Lights recessed down light carries a 10 year residential or 5 year commercial limited warranty. Lotus can offer this because every single driver is powered for a minimum of 24 hours together with the fixture that it is shipped with. Every LED is visually checked before and after the PCB is mounted on the fixture. No Random Tests Lotus Hand Tests Every Fixture And Driver.