Universal Lighting Technologies Everline® LED drivers are ideal for maximum energy savings and control applications. These LED power supplies are proven in the field and feature (depending on driver) high efficiency Constant Current, high range voltage or universal voltage, Class B transient surge protection and/or dimming functionally. If you need an LED driver replacement be sure to ask for Everline® to make sure your application will operate to its full potential.
The Everline® family of 30W drivers provides leading edge technology for high efficiency, application flexibility and reliability in rugged environments. With their tunable outputs, this family is customizable for specific fixture and module applications. Universal's Everline LED Drivers can be configured to set their current output down to 40% of their maximum rated design level. This function is called tuning, or also, programmable LED drivers. Tuning provides the ability to set a tunable drivers output current at levels lower than its full output rating. After a driver is tuned, it can still be dimmed to lower output currents with standard 0-10V controls. Tuning the driver based on the LED module used not only makes each fixture more efficient, it also increases the life of the LED module. Tuning assignments are stored in driver memory and are not lost when power is removed. Most factory produced drivers are tuned to maximum output unless otherwise noted on the label. To determine if your existing Universal LED driver, being used in your application, has been factory tuned, look at the label on the driver. Just below the part number (D700C30347TW-K) you will see the "I out" and "PRGM" data. The factory default setting is, in this example, I out = 700mA and the PRGM = 00. If this information is different, on your existing driver, then your driver has been tuned to a non-factory standard setting. We can have the factory standard settings tuned to match your application.
This item is the Universal Everline LED power supply part number D700C30347TW-K10C (UPC 768386584117). The input voltage is 347 volt and is a 0-10V dimmable LED driver with tuning. The constant current output current is 700mA with 30 watt constant output power. Designed to meet the IEEE C62.41 2.5kV requirements, the driver suppresses transients and limits pass through currents so the LED module is protected. Universal's Everline LED power supplies are UL Dry and Damp Location Rated, FCC Part 15 Class A for non-consumer limits.
The circuit connected to the dimming control terminals is isolated from all primary circuitry but is not isolated Class 2 LED output and has maximum available output parameters that operate within the maximum allowable limits for Class 2, inherently limited as specified in the UL1310 standard for Class 2 Power Units. The dimming control circuit for these models is suitable only for Class 2 wiring methods. Universal Lighting Technologies warrants to the purchaser that each power supply will be free from defects in material or workmanship for a period of 5 years from the date of manufacture when properly installed per instructions and under normal operating conditions of use.
|Input Voltage||347 Volt|
|Output Voltage||15-44 Volt|
|Dimensions||4.93" L x 2.95" W x 1.00" H|
|Warranty||5 Year Limited|