248-276-9640 Weekdays 8-5 EST
Speak With Your Lighting Specialist 248-276-9640 Weekdays 8am-5pm EST
Are you 18 years old or older?
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
Duro Dyne Dyna-Tite 45-degree eyelets are manufactured of zinc plated cold rolled steel and swaged to the wire rope cable with a hydraulic press. 45-degree eyelet assemblies are available for installation with either a 1/4 inch or 3/8 inch fastener. They are also available both in 90 degree and straight assemblies, and as a kit with the appropriate cable lock
This item is the Duro Dyne 45 Degree 1/4 Eyelet. It contains a single 45 Degree Eyelet with WC3-CL12 3/32 Inch Wire Attached. Utilize the Duro Dyne Eyelet connector for static working load limits up to 150 pounds.
Suspension systems typically use threaded rod with washers and nuts to construct a support structure. Sizing, cutting and assembling the rods to the complementary parts and fastening them to an anchor point can be very time consuming. The Duro Dyne Eyelet system is designed for the suspension of all static loads into all concrete types including slagged, cracked, slab and even hollow pot. The eyelet is designed to use a 1/4 inch or 6 mm drill bit. Then tapped into place with a standard hammer, no claw back of the anchor is needed for installation. There is no need for any other tools.
With a working load limit of 150 pounds, or 68 Kilograms, the Duro Dyne 45 Degree Eyelet can be used for most electrical installations. Looking for more possibilities? The 45 Degree Eyelet is sold with the cable pre-attached at different lengths to solve almost any concrete project static load application.
| Manufacturer | Duro Dyne (Rize Enterprises) | |||
| Wire Rope Length | 5 Foot | 10 Foot | 15 Foot | 25 Foot |
| MPN | 4514-05WC3 | 4514-10WC3 | 4514-15WC3 | 4514-10WC4 |
| SKU | 30165 | 30166 | 30167 | 30168 |
| UPC | 797582121659 | 797582121666 | 797582121673 | 797582121680 |
Green Electrical Supply is here to help you maximize your green® on all your electrical supply purchases.
Looking for a quote or need help finding an item, simply use our Contact Us form to request a quote, get assistance, or provide feedback. If you're more of a talker, feel free to give us a call at 248-276-9640 during our weekday hours from 8 am to 5 pm EST.
Here's a little tip to make your quote request even smoother: don't forget to copy the SKU from above and include it along with the quantity in your request. It's a small detail that ensures we get you the most accurate and efficient service. And, just a heads up, the SKU is dynamic, especially for products with multiple options. So, be sure to choose your required options first to view the precise SKU.
