- Request A Quote
Precision Multiple Controls (PMC) Photo Controls provide dusk-to-dawn control of street, parking lot, billboard and security lighting. Mounting types include fixed position mounting, stem mounting and twist lock. With so many different options, Precision and Green Electrical Supply have the right Photo Control sensors for your application.
The Precision Lumatrol Series - Extreme Life - model number EXDV-AP-TD, dusk-to-dawn photocell is designed for use with lighting loads up to 750 watts LED or 1000 watts HID in outdoor security, area lighting or wall packs. The EXDV-AP-TD provides long life, reliable photo control in LED or HID lighting applications requiring a 3-terminal NEMA twist and lock type plug connection. They operate on 105-285 volt, turn on in the evening when light levels reach 1 footcandle and turn off in the morning when light level readings reach 3 footcandles.
The EXDV-AP-TD is constructed with a filtered silicone sensor for accurate, non-drift operation. The housing and window are 30% thicker than standard twist lock photo controls to prevent UV degradation and are sealed to IP65 standards, preventing penetration of moisture, dust and other contaminates. Each EXDV-AP-TD has enhanced LED in-rush protection and a 640 Joule MOV surge arrestor. The physical dimensions of the Precision Lumatrol Extreme Long Life EXDV-AP-TD dusk-to-dawn photocell are 3.07" in diameter by 2.15 high (the control housing only).
Tips To Optimize Photocell Performance
Do not face the photocell into the midday sun. If the photo control is installed on the south side of a building, face the photocell east or west or point the photo control down toward the ground. The best direction to face the photo control is north.
Do not face the photocell where it can see artificial light. Light from windows, signs, street lights, etc., will cause the photo control not to switch on. The photo control should not be positioned so that it sees the light it is controlling (or reflected light - like off of your white siding or white painted soffit overhang). These conditions will cause the light to cycle on and off.
Do not install the photo control with wires up unless there is NO POSSIBILITY of water entering the photo control around the wires. The photo control must be installed in an approved weatherproof box. Do not attempt to caulk around the wires. Installing a Photocell below the box is WRONG! Photocells installed on top of the Box is RIGHT! Any Photo Control installed by the side of the weatherproof box is: ACCEPTABLE!
When you are testing the photocell, be sure to turn on the power (load will come on) and wait up to 5 minutes for the photocell to switch load off. For further testing cover the photo control completely with black tape or another dark material to simulate night conditions. If you cant cover the control with tape, try covering the photo control with the shipping carton to simulate night conditions.
|Volts AC||105-285 Volts|
|Switching Load||1800 VA|
|MOV Joule||640 Joules|
|Mount Type||NEMA Twist Lock|
|Dimensions||3.07" Diameter x 2.15" High|
|Turn On||One FC|
|Turn Off||Three FC|
|Load Rating||1000W HID or 750W LED|
|Warranty||13 Year Limited|
Green Electrical Supply will help you maximize your green® on all your electrical supply purchases, including projects, bids, quotes, and large orders.
Simply use our Contact Us form to request a quote. Or if you prefer, give us a call at 248-276-9640. Weekdays 8am-5pm EST
Tip: Copy the SKU from above and include it along with the quantity on the quote request.
Please note that the SKU is dynamic and changes on products that have multiple options, so choose the required option(s) first to see the precise SKU.