This item is the Rize Con-Lock Kit - part number RMCL2M (R30175). It contains a Con-Lock connector with 2 meters of a looped wire rope cable attached. Utilize the Rize Con-Lock RMCL2M for static working load limits up to 100 pounds.
Suspension systems typically use threaded rod with washers and nuts to construct a support structure. Sizing, cutting and assembling the rods to the complementary parts and fastening them to an anchor point can be very time consuming. The Rize Con-Lock system is designed for the suspension of all static loads into all concrete types including slagged, cracked, slab and even hollow pot. The Con-Lock is designed to use a 1/4 inch or 6 mm drill bit. Then tapped into place with a standard hammer, No claw back of the anchor is needed for installation. There is no need for any other tools.
With a working load limit of 100 pounds, or 50 Kilograms, the Rize Con-Lock can be used for most electrical installations. Looking for more possibilities? The Con-Lock is sold with the cable pre-attached in different lengths to solve almost any concrete project static load application.