SUGGESTED ALTERNATES: 

18 Watt 100-277 Volt LED HID Corn Cob E26 Base Retrofit Lamp

These Metal Halide LED Replacement Bulbs are Available in three wattages, EiKO's LiteSpanLED Series of 180 degree beam angle LED HID Retrofit Lamps (also called out as an LED corn light or corn bulb) are a convenient and energy-efficient solution for replacing traditional compact fluorescent, high-pressure sodium and metal halide sources in enclosed lighting fixtures. The 20, 30 and 40 watt models are available with an E39 mogul or E26 medium screw base. They are an ideal retrofit solution for outdoor security lighting such as shoebox area lights, flood fixtures or wall packs. This series of EiKO LED retrofit bulbs requires your current fixture ballast to be by-passed or totally removed from the circuit. 

Here are EiKO's, 180 Degree Retrofit Corn Cob LED Light Bulbs, suitable for totally enclosed wall pack, shoe box and other typical HID fixtures. Part number LED20WPT/180/40KMED-G7 consumes just 20 watts of 120 to 277 volt 60 Hz energy and is designed to replace up to 100 watt Metal Halide (MH) or High Pressure Sodium (HPS) bulbs. This non-dimmable LED HID Retrofit light bulb, an LED Site, Roadway or Wallpack lighting retrofit option, will produce 2,700 Lumens of 4000K light output, has a CRI of 80 and a rated life of up to 50,000 hours. 

These LED HID Retrofit bulbs have a 180 degree beam angle and the screw-in E26 Medium base mounting easily integrates energy saving LED technology into your standard site lighting, roadway or wall pack lighting format. Once the bulb is installed in your fixture, simply rotate the body of the lamp to direct the LED light output that best suits your specific application. This LED HID Retrofit lighting is built with solid state technology which requires no fans or moving parts. The physical dimensions of the EiKO LED HID Retrofit are 7.09 long by 3.54 wide. These NON-dimmable LED Retrofit bulbs carry a 5 Year Warranty.

The LED20WPT/180/40KMED-G7, 20 watt LED HID Retrofit lamp has been designed to retrofit up to 100 watt Metal Halide or HPS installations, thereby reducing maintenance and energy expenditures in residential, commercial, retail displays, hotel, motel and resort applications and as an energy saving light source for new fixtures and installations. Please NOTE: When retrofitting LED to an HID fixture, the ballast must be by-passed or removed from the fixture. Additionally, by-passing the ballast will insure no RFI interference.

EiKO LED HID Horizontal Retrofit Light Specification Sheet

EiKO LED HID Horizontal Retrofit Light Installation Instructions