High Performance LED ( Light Emitting Diode ), dual rated for 5" or 6" Recessed Cans. These retrofits are a perfect choice for use in your existing 5" or 6" recessed can applications. LED lights produce very little heat, reach full brightness instantly and last 35,000 hours. Exceeding all industry standards and smooth, uniform dimming from 100% down to 0.5%, the TCP LED recessed retrofits are a superb, energy saving option for your existing 65BR30 bulbs.
This TCP 5 to 6 Inch 11 Watt LED Recessed Downlight Retrofit, available in 2700K or 5000K LED light operates on your existing 120V circuit and consumes just 11 watts. These LED retrofit lights generate 800-950 delivered lumens and has a Color Rendering Index (CRI) of 82. The TCP 5"-6" LED retrofit bulb is fully dimmable and suitable for damp locations and they carry a 5 year limited warranty.
Instant on at full brightness these 5" or 6" recessed can retrofit LED fixtures are rated for 35,000 hours (based on L70 standards). The stated 35,000 Hour life is based on functional light quality. After 30% lumen depreciation the functionality of the lamp is deemed to be at end-of life, even though the lamp is still at 70% of initial lumens (the L70 standard). The dimensions of the LED fixture are 7.25" wide by 2.8" MOL. The LED driver is self contained and the finish on the integral baffle and trim is White.
These 120 volt LED light bulbs are IC-Rated for direct contact with insulation and fit most 5" or 6" recessed can fixtures with an E26 medium base. There is an adapter with every retrofit can where one end has a standard E26 medium base socket and the other end has a disconnect connector. With the electricity turned off at your circuit breaker, simply screw the E26 socket into your existing recessed can. Then connect the TCP LED retrofit at the disconnect point. Install the LED fixture like you would install your current trim. You have now converted your recessed can to LED.
Dimming saves energy while setting the right light level to improve mood and ambiance. Screw-in compact fluorescent lamps (CFLs) and screw-in light emitting diode bulbs (LEDs) are a great energy-saving alternative to incandescent or halogen light sources; however, dimming them may be difficult. Lutrons new CL Dimmers for dimmable CFL and LED bulbs have HED Technology which helps alleviate your CFL and LED dimming challenges. Compared to standard dimmers, Lutrons new CL Dimmers keep the lights on as they are dimmed, make sure the lights turn on at all light levels, eliminate or reduce excessive flicker and keep the lights on even with line voltage fluctuations. Lutron CL dimmers are available in Maestro®, Diva®, Skylark Contour, Luméa®, Ariadni®/Toggler® and Credenza® product families.