Keystone Technologies
SKU: MH-400A-D-FCAN
Recommended or frequently bought with this product
More from Metal Halide Ballasts
Recently viewed
248-276-9640 Weekdays 8-5 EST
Speak With Your Lighting Specialist 248-276-9640 Weekdays 8am-5pm EST
Are you 18 years old or older?
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
High Intensity Discharge (HID) lamps require a ballast to apply starting voltage to the lamp and establish current flow an arc between the lamp electrodes. Without a ballast, the arc will extinguish or draw increasing current until some circuit element burns up. Ballasts provide system stability by limiting the current that can be drawn.
Replacement F-Can ballasts are used primarily for indoor downlighting applications where quiet operation is required. All the components of these ballasts are enclosed in a fluorescent-style ballast can and are thermally protected.
Keystone Ballast MH-400A-D-FCAN, Replacement F-Can HID Ballast Kit for 400 Watt Metal Halide. This F-Can HID Ballast is designed with a Circuit Type CWA, for one 400W Metal Halide Lamp Type, M59 ANSI Ballast Type, 446 Input Watts, 120/277 Input Voltage, 60 Hz. The maximum distance this F-Can ballast can be remote mounted from your 400 watt metal halide bulb is determined by the size wire utilized. The maximum distance this F Can ballast can be mounted from your 175 watt metal halide bulb is 10 feet. It has -30C minimum start temperature, UL temperature code of A and an insulation class of 180C. The physical dimensions of this F-Can ballast are 19.19" Long x 3.23" Wide x 2.75" High with 18.63" mounting dimensions and 12-14" leads. Please verify all dimensions for your application as these dimensions may vary by manufacturer. This Keystone Ballast carries a 2 year warranty.
A ballast, like any other electrical device, generates heat during normal operation. Excessive temperature will have an adverse effect on ballast life. Normal temperature limits for Universal F-Can Ballasts have a maximum case temperature of 90°C. For proper installation, insure that remote ballasts are properly vented and mounted to a heat-dissipating surface. Ballasts in metallic casings must always be grounded.
Voltage | 120/277 Volt |
Wattage | 400 Watts |
ANSI Type | M59/H33 F-Can |
Circuit Type | CWA |
Capacitor | 20mF - 440V - 90C |
Dimensions | 19.19" L x 3.23" W x 2.75" H |
Warranty | 2 Year Limited |